Arc Flash Detection in Mining Network Upgrades

Overview

Mining operations rely on extensive high-voltage (HV) electrical infrastructure to power crushers, conveyors, processing plants, and ancillary systems. While essential, this infrastructure introduces significant operational and safety risks most notably arc flash events. These events can result in catastrophic equipment damage, unplanned downtime, and serious injury or loss of life.

Diamond Optics, in collaboration with SEL Instrumentation, developed a Plastic Optical Fibre (POF)-based arc flash detection system tailored specifically for harsh mining environments. The solution integrates optical sensing with SEL’s proven protection relays to deliver ultra-fast, reliable detection and isolation of arc faults, significantly improving safety outcomes while reducing both operational and capital expenditure.

What Is an Arc Flash Event?

An arc flash is a sudden release of electrical energy through the air when insulation or isolation between high-voltage conductors fails. This failure can be caused by:

  • Equipment degradation or contamination (dust, moisture, corrosion)
  • Mechanical failure or vibration
  • Incorrect maintenance procedures
  • Foreign objects or wildlife ingress

An arc flash generates:

  • Extreme heat (often exceeding 19,000°C)
  • Intense light across visible and infrared spectra
  • Pressure waves capable of damaging enclosures
  • Molten metal and shrapnel

In mining environments, where HV transformers, RMUs, and switchgear are often located in remote or confined areas, the consequences of an undetected or delayed arc flash event are severe—posing risks to personnel safety, critical assets, and overall production continuity.

The Challenge

Large mining operators, including tier-one organisations such as BHP, operate sites where even minutes of unplanned electrical downtime can translate into significant financial losses.

Key challenges identified included:

  • Delayed fault detection using traditional electrical sensing methods
  • Susceptibility to electromagnetic interference (EMI) in HV environments
  • Complex installation requirements involving conductive sensors
  • High cost and maintenance burden of existing protection systems
  • Risk of site-wide outages caused by slow or inaccurate fault isolation

Traditional current-based or electrical arc detection methods often struggle in noisy electromagnetic environments typical of mining operations, increasing the likelihood of nuisance trips or, worse, missed events.

The Solution: POF-Based Arc Flash Detection

Optical Sensing Architecture

Diamond Optics engineered a Plastic Optical Fibre (POF) arc flash sensing system designed to detect rapid changes in light intensity associated with arc faults inside:

  • High-voltage transformers
  • Ring Main Units (RMUs)
  • Switchgear and protection enclosures

Rather than relying on electrical signals, the system uses non-conductive optical fibres routed strategically within equipment enclosures to act as distributed light sensors.

Key Technical Advantages

1. Non-Conductive, EMI-Immune Technology

  • POF is completely dielectric
  • Immune to electromagnetic interference
  • Safe to deploy directly within HV equipment
  • Eliminates grounding and isolation concerns

2. Ultra-Fast Optical Response

  • Optical detection occurs in sub-millisecond timeframes
  • Enables near-instantaneous fault recognition
  • Minimises arc energy release before isolation

3. Ruggedised for Mining Conditions

  • Cables rated for high temperature, dust, and vibration
  • Mechanically robust for long-term deployment
  • Resistant to contamination commonly found in mining sites

Integration with SEL Instrumentation

Protection Relay Integration

The optical sensing system was integrated with SEL Instrumentation’s SEL-751 protection relay, a widely deployed platform in mining and heavy industrial power networks.

  • Optical sensors feed into the relay via a dedicated interface
  • The SEL-751 processes optical fault signals alongside traditional protection logic
  • Enables fast, deterministic trip decisions

Marshalling Box Development

To support clean, scalable deployment, Diamond Optics co-developed a custom marshalling box to manage all optical connectivity between:

  • POF sensors installed in transformers and RMUs
  • SEL-751 relay inputs
  • Site protection and control systems

The marshalling box:

  • Centralises optical terminations
  • Simplifies installation and maintenance
  • Improves fault isolation and troubleshooting
  • Provides a clear demarcation point between sensing and protection systems

Operational and Financial Impact

OPEX Reduction

For large mining operators, unplanned outages have cascading impacts:

  • Lost production
  • Restart and stabilisation costs
  • Emergency maintenance call-outs
  • Safety investigations and compliance reporting

By enabling early, accurate arc flash detection, the POF-based system:

  • Reduces false trips caused by EMI
  • Prevents escalation of minor faults into major failures
  • Minimises unplanned downtime events

For sites operated by organisations such as BHP, this translates into significant operational expenditure savings, particularly in remote locations where access and recovery times are long and costly.

CAPEX Protection

Arc flash events often result in:

  • Complete destruction of switchgear or transformer assets
  • Long lead times for replacement equipment
  • Forced infrastructure upgrades outside planned cycles

Rapid optical detection and isolation dramatically reduces the energy released during an arc event, helping to:

  • Preserve high-value electrical assets
  • Extend equipment service life
  • Avoid premature capital replacement

This protects long-term capital investment while improving overall network resilience.

Outcome

The deployment of Diamond Optics’ POF-based arc flash detection system delivered measurable benefits:

  • Enhanced personnel safety in HV environments
  • Faster, more reliable arc fault detection
  • Reduced downtime and production losses
  • Improved protection of critical electrical assets
  • A practical, cost-effective alternative to traditional electrical sensing systems

By combining optical sensing innovation, SEL’s proven protection relays, and mining-hardened cabling solutions, Diamond Optics has delivered a scalable arc flash monitoring platform tailored to the real-world demands of heavy industrial and mining operations.

Conclusion

As mining operations continue to push for higher productivity, automation, and safety compliance, traditional protection approaches are no longer sufficient on their own. Optical arc flash detection represents a critical evolution in HV protection—one that aligns safety, reliability, and cost efficiency.

Diamond Optics’ collaboration with SEL Instrumentation demonstrates how optical technologies can be seamlessly integrated into existing protection architectures, delivering tangible operational and financial value for large-scale mining networks.

Posted in , ,